background image

Instructions for Maintenance

Operations of maintenance and repair may only be executed by persons who possess the 
necessary   knowledge   and   abilities   (e.   g.   professional   workshop).   Before   correcting 
disturbances and on interruptions of work, the entire engine is to be shut down and its 
standstill is to be awaited. Apt measures are to be taken against erroneous actuation and 
involuntary moves (e. g. pull the plug). Foreign substance or material parts may not be 
removed from near moving parts. Apt tools are to be used for maintenance and installation. 
Only original EDER spare parts are to be used for replacement!

Instructions for the Use of Personal Protective Equipment

On operating the planer, all regulations and security provisions as for the operation of power 
saws are applicable. The service personnel must wear equipment for the protection of the 
body, especially including eye and face protection, ear protection, protective gloves and 
protective shoes. Leg protection is recommended.

Protective Devices

The machine may only be used with the protective and security devices (e. g. folding plate) 
provided for the purpose. Protective and security devices may not be invalidated and must 
be cleaned if necessary.

Further help

If you have any questions about installation, commissioning, and application security, or 
even in case of a fault, please call your local dealer and of course us as the manufacturer by 
phone or e-mail. Our contact details can be found on the first page of this guide.

EDER planer EPH1, 01.07.09

- 5 -

Summary of Contents for EPH1








Reviews: