3. RINSE AID.
Cleans and adds brilliance.
The principal function of this product is to facilitate drying and prevent water drops
being left on the dishes after the wash, while at the same time giving all surfaces a
brilliant shine.
I have a compartment in the upper part of the inner door , just to the right of the
detergent compartment.
Turn and take off the cap of this compartment, and add rinse aid up to the indicated
maximum. Be careful that it does not over flow; if this occurs dry the spilt drops with a
cloth so that the wash quality will be correct otherwise over foaming may occur.
•
How is the rinse aid intake regulated?
Once you have filled the compartment, you can adjust the level of rinse aid released by
moving the selector in the dispenser between numbers 1 to 6 (it leaves the factory in
position no. 2).
Before adjustment, I recommend that you judge for yourself by observing the final result
of each wash. If there are water drops or lime stains on the dishes, adjust the selector
to a higher number, conversely adjust to a lower number to reduce the quantity released
if the dishes show white, sticky streaks.
•
When do you have to add rinse aid?
Only when it is indicated on your particular dishwasher model.
•
Models with Transparent-Window Indicator:
This is beside the rinse aid compartment.
If it is clear it needs rinse aid; fill it taking care that it does not overflow. If it is dark it has
sufficient.
•
Models with Luminous Indicator:
When the liquid runs out, this light on the
control panel comes on. This is a clear warning to refill with rinse aid.
•
Where and how is rinse aid added?
32
E
N
G
L
IS
H
25
26
4
