Free-standing dishwashers
Introduction
Our FREE-STANDING DISHWASHERS have
been designed so taht you can put them on
their own, in the most suitable spot.
Dimensions
Figure 2 gives the measurements of the
appliance. Study them, as they will help you
install the appliance.
Levelling and positioning
Before installing the DISHWASHER, the ap-
pliance must stand firmly on the floor and be
as perpendicular as possible.
Level it accordngly. correcting any possible
irregularities in the floor.
This may be done by adjusting the height of
the feet at the bottom of the appliance (Figure
7) (0-20 mm).
A maximum 2% inclination level is allowed.
Once you have completed these
tasks, proceed with the electrical and
water connections according to the
instructions.
Panellable dishwashers
Introduction
Our PANELLABLE DISHWASHERS are de-
signed so that you can put them on their own
or in with the rest of your kitchen cabinets
and appliances. In the latter case, you can
adapt them to the decor and arangement of
your kitchen, by performing a few simple
operations.
Dimensions
Figure 2 provides the measurements of the
appliance and Figure 5 the minimum measu-
rements of the kitchen units.
Levelling and positioning
Before installing the DISHWASHER, the ap-
Important information
In order to help install your DISHWASHER,
we have included a series of drawings and
diagrams at the end of this MANUAL..
They also provide a detailed list of all the
elements, measurements and operations to
keep in mind during installation.
Please open out the drawings and diagrams,
as they will help you to understand the text
and be a great help in solving small proble-
mas when installing the dishwasher.
Technical Specification Plate
The TECHNICAL SPECIFICATIONS PLATE,
stuck on the side of
the DISHWASHER door,
contains technical information as well as the
serial number of the appliance.
READ THIS INFORMATION before making
the electrical connections.
Electrical Connections
The electrical connections should be carried
out by a specialist who is familiar with the
legal provisions as wellasthe standards and
regulations in force in each country.
Warning
Before installing the appliance and connec-
ting both the water and electricity supply, it is
extremely important that you take into ac-
count whether your DISHWASHER is a PA-
NELLABLE or INTEGRATED model. You will
need to perform a number of operations to
ensure that you isr installed dishwasher pro-
perl.
Unpacking
Carefully remove all the protective packing
from the appliance.
If your dishwasher is an integrated model,
remove the brackets located at the bottom of
the dishwasher. (Fig. 2).
Remove the packing from around the bas-
kets inside the machine.
83
