8
F T P S E R V I C E
U G _ C e l l G O 3 G _ V 2 . 0 . 0 _ R e v 1
3 6 / 6 5
8.2
Get data from server - AT#FTPGET
8.2.1
Description
This command, sent by the attached host, directs the CellGO3G to connect to the specified FTP server
and to retrieve the specified file from this server. Once the operation is completed, the CellGO3G closes
the FTP connection.
Once an IP link is established, the attached host can retrieve a file from a FTP server at any time (except
when the CellGO3G is already in a process using TCP resources).
This command is similar to a GET operation (with an automatic connect/disconnect) issued by a
standard FTP client on a PC. The CellGO3G handles the global FTP get process by itself.
Note
: Each <ETX> character present in the payload data of the FTP flow will be coded by the CellGO3G
on the serial port as <DLE><ETX>. Each <DLE> character present in the payload data will be coded as
<DLE><DLE>. The attached host must then decode the FTP flow to remove these escape characters.
Summary of Contents for CellGO3G
Page 1: ...CellGO3G User Guide ...
