PPS20
–
User Manual Rev. 1.10
EDFelectronics JRMM Sp. z o.o. sp.k.
Rybnicka 64, Radlin 44-310, Poland
; e-mail: info@edfelectronics.eu tel.: +48 604 343 504
43
Fig.4.3.3
Turn rotary encoder or use arrow buttons
▲
or
▼
to select
Output Mode
TAB;
press
ENTER
button or rotary knob to edit. Press
ENTER
button or rotary knob
again to confirm the settings.
The following mode of operation are possible to set:
-
DC
mode operation: PPS20 will operate with DC voltage, current or power
operation; see chapter 4.3.3 for details,
-
Pulse: PPS20
will operate with PulseDC voltage, current or power
operation; see chapter 4.3.3 for details,
3.
Timer Mode:
Up or Down
–
Fig.4.3.4
Fig.4.3.4
Turn rotary encoder or use arrow buttons
▲
or
▼
to select
Timer Mode
tab; press
ENTER
button or rotary knob to edit. Press
ENTER
button or rotary knob again to
confirm the settings.
The following timer of operation are possible to set:
-
Up
: operation of PPS20 is active continually and follows clock counting
when HV ON is activated; time of operation is displayed at the main
screen
–
see chapter 4.2.7 for details,
-
Down
: operation of PPS20 is active only for the time period which has
been set on the main screen and counts down when HV ON is
activated; actual remain time is displayed at the main screen
–
see
chapter 4.2.7 for details.
4.
Beep:
On or Off
–
Fig.4.3.5
