PPS20
–
User Manual Rev. 1.10
EDFelectronics JRMM Sp. z o.o. sp.k.
Rybnicka 64, Radlin 44-310, Poland
; e-mail: info@edfelectronics.eu tel.: +48 604 343 504
52
Fig.5.2.0
Go to the
Settings
tab with the next step to configure main parameters
–
Fig.5.2.1
Fig.5.2.1
There are only two parameters to be set (
Fig. 5.2.2
):
-
baudrate ( can be selected from: 2400 kBs, 4800 kBs, 9600 kBs, 19 200 kBs,
38 400 kBs, 57 600 kBs, 115 200 kBs)
-
device address (
can be selected from 1 …..
247 )
Fig.5.2.2
NOTE:
no other settings for Serial interface are needed. For more hardware
specification please refer to chapters 3.3.6 and 4.3.1 for details
NOTE:
unit address is used only for RS485 communication, where this parameter
has to be different for each the same device in the same network
NOTE:
if connection cannot be established, ensure about the proper address
settings, and try to set slower baudrate
