PPS20
–
User Manual Rev. 1.10
EDFelectronics JRMM Sp. z o.o. sp.k.
Rybnicka 64, Radlin 44-310, Poland
; e-mail: info@edfelectronics.eu tel.: +48 604 343 504
53
5.3
E
THERNET
I
NTERFACE
C
ONFIGURATION
The PPS20 can be also controlled by Ethernet-LAN port.
To configure LAN port as the master control of the device, go to the
Control mode
tab and select
Ethernet
mode
–
Fig. 5.3.0 Turn rotary encoder or use arrow
buttons
▲
or
▼
to navigate; press
ENTER
button or rotary knob to edit. Press
ENTER
button or rotary knob again to confirm the settings.
Fig.5.3.0
Go to the
Settings
tab with the next step to configure main parameters
–
Fig.5.3.1
Fig.5.3.1
There are four parameters to be set (
Fig. 5.3.2
):
-
DHCP on/off
–
manual or automating IP address assign,
-
IP address (IVP4 standard),
-
Net Mask
–
network mask
-
Gateway
–
gateway of the connected network
Fig.5.3.2
