Chapter 5
| Topology
Discover Nodes
– 31 –
Discover Nodes
The Node Discovery feature allows you to add nodes quickly and correctly. It is
designed to add nodes ahead of the on-site installation.
To use this feature, connect the management port of the new nodes to a switch or a
hub for the PoP to access their information via the management ports.
Once the nodes are connected, click the Discover button in the upper-left corner of
the Node Setting page. After processing, the list of discovered nodes is displayed.
Figure 18: Node Discovery Result
Select the nodes by checking the box. Then click Add to save the selection and
automatically add those nodes to the current topology.
Link Setting
In Link Setting, define the links inside the topology by selecting peer nodes and the
operating channel. Please note the following rules:
1.
For each radio of a DN, at most 2 links to any one DN can be established.
2.
For each radio of a DN, at most 15 links to different CNs can be established.
3.
All links on the same radio should be on the same channel.
