Quick Start Guide
– 2 –
6. Connect Network Cables
For the RJ-45 Management port, connect 100-ohm Category
5, 5e or better twisted-pair cable.
Connect network cables to QSFP+ interfaces:
◆
If you are connecting fiber optic cables, first install
QSFP+ fiber transceivers and then connect the fiber
optic cabling to the transceiver ports.
◆
If you are using twinax copper cables (DAC cables) for
port connections, plug the QSFP+ transceivers on the
end of the DAC cables directly into the QSFP+ slots.
2
1
1
2
Hardware Specifications
Switch Chassis
Size (WxDxH)
442 x 617 x 44 mm (17.40 x 24.29 x 1.73 inches)
Weight
9.85 kg (21.72 lb), with two installed PSUs
Temperature
Operating: 5° C to 45° C (41° F to 113° F)
Storage: -40° C to 70° C (-40° F to 158° F)
Humidity
Operating: 5% to 95% (non-condensing)
Power
Consumption
282 Watts maximum
AC Rating (Wedge-16X-AC)
AC Input
100–240 VAC, 50-60 Hz, 3 A
DC Rating (Wedge-16X-DC)
DC Input
-42 – -72 VDC, 6 A maximum
Regulatory Compliances
Emissions
EN 55022:2010, Class A
EN 61000-3-2:2009, Class A
EN 61000-3-3:2008
FCC Class A
CE Mark
VCCI Class A
Immunity
EN 55024:2010
IEC 61000-4-2/3/4/5/6/8/11
Safety
CSA 22.2 No 60950-1 & UL60950-1
IEC/EN60950-1
