5
Important: The kegerator should be level before installation.
Note: A detailed installation guide of all the dispense kit components may be included with
your kegerator depending on the type purchased.
Recommended Grounding Method
For your personal safety, this appliance
’s plug must be grounded. It is equipped with a 3-
prong power supply cord. To minimize possible shock hazard, the cord must be plugged
into a mating 3-pronged wall socket, and grounded in accordance with the National
Electrical Code and local codes and ordinances. In the event of a malfunction or
breakdown, grounding will reduce the risk of electric shock by providing a path of least
resistance for electrical current.
•
Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not
under any circumstances, cut or remove the third (ground) prong from the power
cord.
•
Any questions concerning power and / or grounding should be directed toward a
certified electrician.
•
This appliance requires a standard 110~120 volt, 60 Hz electrical outlet with three-
prong ground.
•
Do not use outlet adaptors. No other appliance should be plugged into the same
outlet. Be sure that the plug is fully inserted into the outlet.
Leveling the Kegerator
It is important for the kegerator to be leveled in order to work properly. The kegerator has one
adjustable leveling leg on the front right corner of the unit. If you find that the surface is not
level, rotate the adjustable leg until the kegerator becomes level.
1.
Place a carpenter’s level on top of the product to see if the kegerator is level from front to
back and side to side.
2. Adjust the height of the kegerator as follows:
Turn the leveling leg to the right to lower the kegerator.
Turn the leveling leg to the left to raise the kegerator.
Summary of Contents for BR1000SS
Page 5: ......
