4
ELECTRIC SHOCK HAZARD!
•
Plug into a grounded 3-prong outlet.
•
Never remove the grounding prong from the plug.
•
Never use an adapter to bypass the grounding prong.
•
DO NOT use an extension cord.
•
Failure to follow these instructions can result in fire, electrical shock, or death.
•
Do not kink or pinch the power supply cord between the beverage refrigerator and the
wall or cabinet.
•
The beverage refrigerator should be installed on a firm and level surface that will be
able to support the entire weight of a fully loaded unit. It is important for the beverage
refrigerator to be level in order to work properly. If needed, you can adjust the height
of the beverage refrigerator by rotating the feet. See the “Leveling the Beverage
Refrigerator” section.
•
A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance
with National Electrical Code and local codes and ordinances, is required.
Installation Clearance Requirements
To ensure proper ventilation, allow at least 5” of clearance at the back, 3” at the top, and 3” at
the sides.
Electrical Requirements
Summary of Contents for BR1000SS
Page 5: ......
