EdgeStar BR1500BL, Owner'S Manual

12

ELECTRIC SHOCK HAZARD!

• Plug into a grounded 3-prong outlet.

• Never remove the grounding prong from the plug.

• Never use an adapter to bypass the grounding prong.

• DO NOT use an extension cord.

• Failure to follow these instructions can result in fire, electrical shock, or death.

!

Electrical Requirements

Recommended Grounding Method

Before you move your Kegerator into its final location, it is important to make sure you have the proper 

electrical connection:
A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National Electrical 

Code and local codes and ordinances is required.
It is recommended that a separate circuit, serving only your kegerator, be provided. Use receptacles 

that cannot be turned off by a switch or pull chain.

The fuse (or circuit breaker) size should be 15 Amps.

For your personal safety, this appliance must be grounded. It is equipped with a power supply cord that 

has a 3-pronged grounding plug. To minimize possible shock hazard, the cord must be plugged into a 

mating 3-pronged wall socket and grounded in accordance with the National Electrical Code and local 

codes and ordinances. If a mating wall socket is not available, it is the personal responsibility of the 

customer to have a properly grounded, 3-prong wall receptacle installed by a qualified electrician.

Leveling the Kegerator

It is important for the kegerator to be level in order to work properly. It can 

be raised or lowered by rotating the plastic sheaths around each of the 

feet on the bottom of the machine. If you find that the surface is not level, 

rotate the feet until the kegerator becomes level. You may need to make 

several adjustments to level it. We recommend using a carpenter’s level 

to check the machine.

1. Place a carpenter’s level on top of the product to see if the kegerator 

is level from front to back and side to side.

2. Adjust the height of the feet as follows: 

Turn the leveling feet to the right to lower that side of the kegerator.

Turn the leveling feet to the left to raise that side of the kegerator.

Note: 

Once you are ready to install the unit in a cabinet or directly on the floor, you must 

adjust the feet to level the kegerator.