12
Operation
Installation Checklist before Operation
Temperature Control
1. Have all packing materials and tape been removed from the interior and exterior of the kegerator?
2. Have the installation instructions been followed, including connecting the machine to electricity?
3. Has the machine been leveled?
4. Is the kegerator in a site where the ambient temperature is between 50°F and 90°F all year round?
5. Is there a minimum of 4” behind and 2” on the sides of the kegerator?
6. Has the kegerator been thoroughly cleaned prior to use?
This kegerator has one control knob located on the left of the inside of the cabinet. Turning the knob
to the right or left will make the unit colder or warmer respectively, 1 being the warmest and 6 the
coldest. The kegerator should only be set to the coldest setting (6) for short periods of time while
dispensing. If the kegerator is set to the coldest setting for an extended period of time, your keg will
freeze. For keg storage,
we recommend setting the knob between 4 and 5.
Note:
Whether your kegerator can reach cooler temperature depends on the ambient
environmental conditions.
Note:
If you power off the unit, please wait at least 5 minutes before powering it back on.
!
!
OFF
WARMER
COLDER
4
5
3
2
1
6
