background image

17

EdgeStar Limited Warranty

WHAT IS COVERED:

LABOR: For a period of NINETY (90) DAYS from the date of original purchase, labor will be performed free of charge at an authorized EdgeStar 

repair facility. At its option, EdgeStar will repair the product with new or remanufactured parts, or exchange the defective product with a new, 

refurbished, or remanufactured product. If a product is replaced, it will carry the remaining warranty of the original product. After the ninety (90) 

day period, EdgeStar will no longer be responsible for labor charges incurred. All defective products and parts covered by this warranty will be 

repaired or replaced on a mail-in basis to an EdgeStar authorized repair facility.
PARTS: For a period of ONE (1) YEAR from the date of original purchase, EdgeStar will supply new, rebuilt, or refurbished parts free of 

charge. EdgeStar may request a defective part be returned in exchange for the replacement part. All replacement parts or products will be new, 

remanufactured, or refurbished. All products and parts replaced by EdgeStar under warranty service become the property of EdgeStar.
This warranty applies to the original purchaser only, and only covers defects in workmanship experienced during operation of the product under 

normal service, maintenance, and usage conditions. This warranty applies to the purchase and use of this product in residential settings within 

the contiguous United States of America. 

WHAT IS NOT COVERED- 

The following limitations apply to the coverage of this warranty. This warranty does not cover:

• Labor charges for installation, setup or training to use the product.

• Shipping damage, and any damage caused by improper packaging for shipment to an authorized service center, and any damaged caused 

by improper voltage or any other misuse, including abnormal service, handling, or usage.

•  Cosmetic damage such as scratches and dents.

• Normal wear and tear on parts or replacement of parts designed to be replaced, e.g. filters, cartridges, batteries.

• Service trips to deliver, pick-up, or repair, install the product, or to instruct in proper usage of the product.

• Damages or operating problems resulting from misuse, abuse, operation outside environmental specifications, uses contrary to instructions 

provided in the owner’s manual, accidents, acts of God, vermin, fire, flood, improper installation, unauthorized service, maintenance negligence, 

unauthorized installation or modification, or rental or commercial use.

• Labor, service transportation, and shipping charges incurred 91 days or more after the date of original purchase.

• The use of EdgeStar products in commercial or rental settings.

• Optional accessories, attachments, and appearance items.

• Products that have been modified to perform outside of specifications without the prior written permission of EdgeStar.

• Products lost in shipment, or theft.

• Products sold AS IS or from an unauthorized reseller.

• Products that have had their serial numbers removed or defaced. Products with serial numbers that have been invalidated.

• Damage to personal property from use of product. 

• Replacement of repair of household fuses, circuit breakers, wiring, or plumbing.

OBTAINING WARRANTY SERVICE: 

If you believe your product is defective, contact EdgeStar Customer Support for troubleshooting 

assistance and warranty service at www.edgestar.com or call 1-866-319-5473. Before contacting Customer Support you are required to have 

your model number, serial number, and proof of purchase available upon request. Once an EdgeStar authorized representative has confirmed 

that your product is defective and eligible for warranty service, the product must be returned to an EdgeStar authorized repair facility. EdgeStar 

is not responsible for damage resulting from shipper mishandling or improper packaging. Do not return a defective product to the place of 

purchase. Products received without a return authorization number will be refused.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY 

OF  MERCHANTABILITY  OR  FITNESS  FOR A  PARTICULAR  PURPOSE.  TO  THE  EXTENT ANY  IMPLIED  WARRANTY  IS  REQUIRED 

BY  LAW,  IT  IS  LIMITED  IN  DURATION TO THE  EXPRESS  WARRANTY  PERIOD ABOVE.  NEITHER THE  MANUFACTURER  NOR  ITS 

DISTRIBUTORS  SHALL  BE  LIABLE  FOR  ANY  INCIDENTAL,  CONSEQUENTIAL,  INDIRECT,  SPECIAL,  OR  PUNITIVE  DAMAGES  OF 

ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN 

CONTRACT, TORT, OR OTHERWISE. IN NO EVENT AND UNDER NO CIRCUMSTANCE OF ANY TYPE OR KIND SHALL THE SELLER, 

MANUFACTURER AND/OR DISTRIBUTOR BE LIABLE FOR ANY REASON, UNDER ANY THEORY, FOR MORE THAN THE BASIC COST 

OF  THE  PRODUCT  TO  THE  PURCHASER  OR  END  USER.  SOME  STATES  DO  NOT ALLOW  THE  EXCLUSION  OF  INCIDENTAL  OR 

CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL 

RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.

One (1) Year Parts & Ninety (90) Days Labor

This product is warranted by EdgeStar and is subject to any conditions set forth as follows:

Summary of Contents for BWC121LT



















Reviews: