10
9. Carefully insert the door into the upper right corner hinge, then slide the door on top of the lower hinge
and secure the door by installing the lower screws.
Operation
Installation Check List Before Operation
1. Have all packing materials and tape been removed from the interior and exterior of the
wine refrigerator?
2. Have the installation instructions been followed, including connecting the machine to
electricity? And has proper grounding been installed for the wine refrigerator?
3. Has the machine been leveled?
4. Is the wine refrigerator in a site where the ambient temperature is between 50° F and
95° F all year round?
5. Is there enough clearance for proper air circulation?
Using the Temperature Control Panel
The single zone of this wine refrigerator has a temperature range from 40°F to 65°F and will
display the set temperature.
Up Button
: Press the button on the control panel to increase the temperature by 1
degree increments.
Down Button
: Press the button on the control panel to lower the temperature by 1
degree increments.
RUN:
When lit, the unit is in cooling mode
Light Button
: Press the button to turn the inner light on or off.
Power Button
: Turns the unit on and off. ( press and hold this button for approximately 3
seconds)
The Celsius or Fahrenheit light will be lit depending on what scale temperature is being
displayed. To switch between C and F.
press and hold both buttons (▲/ ▼) simultaneously for
approximately 3 seconds. A sound will then beep and the indicator light will illuminate next to
desired temperature setting.
