Warning:
CO2 can be dangerous! CO2 cylinders contain high-pressured gas, which can be hazardous if handled improperly. Please handle with care.
1
2
3
4
5
Mount the tower gasket
(#13) by lining it up with
the preexisting holes at
the top of the unit.
Install the tower (#3) by
first unraveling the beer
line (#10) from the
bottom of the tower.
Feed the beer line
through the top opening
that was under the
cabinet plug.
Install Tower
Secure Tower
Install Handle & Faucet
Install Railing
Once the beer line (#10)
is fed into the unit line up
the holes at the bottom of
the tower, install the four
bolts (#14) and secure
with the flat washer and
nut from the inside.
Line up the guard rail (#4)
with the existing holes at the
top of the unit. Use the rail
screws (#15) to mount the
guard rail to the top of the
unit.
Secure CO
2
Tank
Place the CO
2
cylinder on
the inside ledge and secure
with the cylinder strap
(#6).
Screw the faucet handle (#1) to
the beer faucet (#2). Line up the
beer faucet to the tower shank
at the front of the tower (#3)
and tighten the collar by hand.
6
Power on unit
Adjust the temperature by
turning the thermostat
knob (1 is the warmest to
7 is the coldest setting).
Note: To help keep the
temperature uniform
throughout the unit, the
circulation fan will
continually run even if you
turn the thermostat to off.
You can only shut off the
circulation fan by unplug-
ging the unit.
