Warning:
This guide is provided for informational purposes only. It is provided as a supplement to the owner’s manual.
Please refer to the owner’s manual for a full discourse on installation, usage and maintenance. If you have any questions about the installation of
this appliance, feel free to contact EdgeStar service at 866.319.5473 or consult a qualified installer. Neither the manufacturer nor its distributors
shall be liable for any incidental, consequential, indirect, special, or punitive damages of any nature, including without limitation, lost revenues or
profits, or any other damage whether based in contract, tort, or otherwise.
CO
2
cylinder comes empty due to HAZMAT restrictions. It will need to be filled locally at any air/gas
supplier prior to use.
Removing the Unit from the Pallet
Cleaning the Unit
1
2
3
4
1. Carefully remove the straps and packaging from the unit
2. Locate the metal L-brackets on the base of the pallet.
3. Unscrew the metal L-brackets by using a screw driver.
4. Remove L-brackets from pallet. With two people, carefully lift the unit off the pallet.
*Note: We recommend keeping the packaging until you have inspected the product for damage and tested the unit to
work properly.
Monthly maintenance is required to be covered under the manufacturers warranty. To maintain your refrigerator,
unplug the unit and use a vacuum attachment to clean out the side and back vent grills. This will keep your refrigera-
tor running efficiently and prolong the life of your compressor.
