If you need to change your backup preferences:
•
Click Settings. See
Backup Settings
for details.
Restoring
You can restore your iPrism from a local backup or to its original factory configuration.
Restoring Your System from a Local Backup
1.
In the Backup & Restore window, select Restore from backup from the dropdown list.
2.
Click Restore.
Note: iPrism v4.0 introduced a new database format. Backups created prior to
version 4.0 are NOT compatible and cannot be restored.
Restoring iPrism to its Default (Factory) Configuration
Restoring the iPrism to its factory settings clears all user-defined configuration information. You
should do a backup of your current configuration before performing this procedure. (See
Backing
Up
).
1.
In the Backup & Restore window, select Restore Factory Configuration from the dropdown list.
Note: This restores iPrism to its “out of the box” state. All settings, including
network settings, are lost or set back to their default values.
2.
Click Restore.
3.
Click Yes to confirm.
The iPrism reboots within two minutes, and your iPrism session is ended.
When you log into iPrism again, you will be presented with the installation wizard, as if you were
setting up iPrism for the first time. Refer to your
iPrism Installation Guide
for assistance with this
wizard.
Event Log
The Event Log provides a status record of Access Events – the number of web and application
accesses. Also provided is the date of the oldest record accessed.
Chapter 6 Maintenance
89
iPrism
Administration Guide