2.
In the WCCP frame, select your version (WCCP v1 or WCCP v2) from the Version dropdown
list.
Figure 86. WCCP selection
3.
In the Router dropdown list, select the IP address of your router, or, if you need to add a Router,
click Add.
4.
To set the WCCP password, click Set Password.
Refer to the iPrism Knowledgebase for information on configuring various versions of the WCCP
router:
www.edgewave.com/support/web_security/knowledgebases.asp
Configuring SMTP Relay Settings
iPrism uses the SMTP protocol to perform the following types of communications:
•
reports
•
email alerts
•
notifications (upgrades, filter list problems, registration)
•
access requests
Chapter 7 System Settings
128
iPrism
Administration Guide
