3.
Select Enabled to turn on the warning or Disabled to turn it off (save for later use).
Note: When a warning is disabled, the ACL associations still appear even
though they are not affected. iPrism will activate the warnings for those ACLs
when the warning is enabled.
4.
In the Frequency frame, specify how often the trigger should reset. For example, 2 hrs means
that, if the selected category generates a warning, the user will not receive another warning for 2
hours.
5.
In the ACL Categories frame, click Select and choose the categories to be applied to the
warning. Click OK to return to the Warnings window.
Note: The warning will appear the first time a page from any category on the list
is accessed. It will not appear for pages in other categories from the same list,
within the reset trigger timeframe. The warning notification lists all of the
categories to which the warning applies.
6.
Click OK to save this warning.
Figure 24. Adding a Warning
Once the warning has been defined it can be assigned to an access control list. See
Creating a New
Web ACL
for more information.
Chapter 3 Profiles & Filters
39
iPrism
Administration Guide