6
Turning Recording On/Off
To start/stop recording, keep the button pressed for
two seconds while the LED does not signal. When
the recorder starts recording, the LED flashes five
times. When the recorder stops recording, the LED
flashes once.
While recording, the sequences of LED flashes
show the charge of the battery (the first sequence:
1 flash – from 5% to 100% , 2 flashes – from 1% to
5 %, and 3 flashes mean that the battery is almost
discharged (it should be changed) and the second
sequences show the free memory capacity: 1 flash
– 75%-100%, 2 flashes –from 50% to 75%, 3
flashes – from 25% to 50%, and 4 flashes – from
0% to 25%).
