6
Start and Stop Recording
To start/stop recording, keep the button pressed for
-4 seconds while the LED does not signal. When
the recorder starts recording, the LED flashes five
times. When the recorder stops recording, the LED
will flash once.
While recording, the sequences of LED flashes
show the charge of the battery (the first sequence:
1 flash – from 5% to 100%, 2 flashes – from 1% to
5 %, and 3 flashes mean that the battery is almost
discharged (it should be changed). In 2-4 seconds,
the second sequences show the free memory
capacity: 1 flash – 75%-100%, 2 flashes –from
50% to 75%, 3 flashes – from 25% to 50%, and 4
flashes – from 0% to 25%).
