background image

16

LIMITED WARRANTY POLICY

 To register your product warranty, visit our website at: www.edic-usa.com/warranty-registration/

LIFETIME on rotationally molded polyethylene tanks

2 YEARS on service labor, and all other parts not covered by the LIFETIME terms

EDIC REPLACEMENT PARTS LIMITED WARRANTY PLAN 

All parts sold as replacement parts for out-of-warranty EDIC products have the following Limited Warranty, with no warranty on labor: 30 

DAYS 

Your product is warranted to be free of defects in material and workmanship for the period set forth above, after the date of delivery to the 

retail purchaser, when operated in normal service and used in accordance with the operating and maintenance instructions in the Owner’s 

Manual. This warranty is limited to and provides at no cost to the retail purchaser repair or replacement of parts determined to be defective, 

at EDIC’s option, and labor, if provided for above, to replace or repair the parts (“service labor”) according to EDIC’s Standard Rates, during 

the warranty period set forth above. This warranty excludes transportation charges unless authorized in writing by EDIC. No warranty 

returns for refund or credit will be permitted. In the event of a defect, these are your exclusive remedies. Warranty claims must be made in 

writing to EDIC prior to returning the product and no products will be accepted for repair or replacement without prior authorization by 

EDIC. Use of parts not approved by EDIC in EDIC products will void this warranty. Warranty repair or replacement shall not extend the 

original warranty period of the product, and replacement parts used for in-warranty repairs will only be warranted for the remainder of the 

original warranty and not from their installation date. Any parts or product replaced under this Limited Warranty will become the property 

of EDIC.

EXCEPTIONS AND EXCLUSIONS FROM THE WARRANTY. This Limited Warranty only covers product issues caused by defects in ma-

terial or workmanship during normal service. It does not cover product issues from any other cause, including but not limited to (a) trans-

portation damages; (b) alteration by unauthorized persons; (c) unauthorized use, unreasonable use, misuse, or abuse (including the use of 

incompatible or corrosive chemicals or overloading of capacity); (d) failure caused by lack of proper maintenance and cleaning; (e) normal 

wear on items such as cords, belts, hoses, switches, bumpers, gaskets, seals, carbon brushes, squeegees, harnesses, valves, cams, extraction 

brushes, bearings, handle grips, filters and finishes; (f) acts of God; or (g) modification of or any part of the product. This Limited Warranty 

does not cover EDIC products sold AS IS and WITH ALL FAULTS. This Limited Warranty is valid only in the United States and Canada. 

We suggest that you complete and return the enclosed product registration card promptly to facilitate verification of the date of the origi-

nal purchase. However, return of the product registration card does not eliminate the need for the retail purchaser to maintain the original 

proof of the purchase in order to obtain the warranty benefits. In the event that you do not have proof of purchase date, the purchase date 

for purposes of this warranty will be the date of manufacture. 

For specific information on how to obtain warranty services for your product, please write to: EDIC/Warranty Department 1753 Blake Ave. 

Los Angeles, CA 90031

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE OF THIS STATEMENT. THERE IS 

NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY USE ON THESE GOODS. 

NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 

PURPOSE, APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED 

ABOVE, AND NO OTHER EXPRESS WARRANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH 

RESPECT TO THE PRODUCT SHALL BIND EDIC. EDIC SHALL NOT BE LIABLE FOR ANY FORM OF ACTION FOR ANY DAM-

AGES, WHETHER DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR INDIRECT, TO PROPERTY OR PERSON, INCLUDING 

BUT NOT LIMITED TO, DAMAGE OR LOSS OF INCOME, LOSS OF PRODUCTION, OR LOSS OF PROFITS DUE TO MALFUNC-

TIONING OF ANY PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED. IN NO EVENT SHALL 

RECOVERY OF ANY KIND AGAINST EDIC BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD 

BY EDIC, AND CAUSING 

THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL THE RISK AND LIABILITY FOR LOSS, 

DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE OR 

MISUSE OF, OR INABILITY TO USE, THE PRODUCT NOT CAUSED DIRECTLY BY NEGLIGENCE OF EDIC. THIS LIMITED WAR-

RANTY STATES YOUR EXCLUSIVE REMEDY. 

Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied 

warranty lasts, so the above limitations or exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you 

may have other rights which vary from state to state (or province). 

Summary of Contents for FLOODBUSTER FB50


















Reviews: