26
ENGLISH
INSTALLATION
*
INSTALLER
LOADING THE PELLETS INTO THE
PELLET TANK
To access the tank, open the lid *
Use UNI EN ISO 17225-2 category A1 wood pellets
Use UNI EN ISO 17225-2 category A1 wood pellets
or similar regulatory products with the following
or similar regulatory products with the following
characteristics.
characteristics.
diameter 6 mm;
diameter 6 mm;
length 3-4 cm
length 3-4 cm
humidity <10 %
humidity <10 %
For reasons of safety and environmental compatibililty,
DO NOT burn plastic, painted wood, coal, bark or
other such materials in the stove.
Do not use the stove as an incinerator
Caution
Using fuels other than those specified can
damage the appliance
1) When doing so, DO NOT rest
the bag of pallets on the top
grille, since the plastic bag may
melt and damage the appliance’s
paint.
2) Use the gloves when loading
the stove while it is operating and
hence hot to the touch.
FIRST IGNITION PROCEDURE
• Make sure you have read and understood this
manual
• Remove all flammable materials from the appliance
(manuals, labels, etc). Make sure to remove the
labels on the glass.
There may be a slight smell of paint the first few times it
is ignited, however, this will disappear quickly.
Summary of Contents for Blade2 12 Up
Page 61: ...61 ENGLISH MAINTENANCE 4 2 1 USER Position correct Position incorrect deflector Cross section ...
Page 69: ...69 ENGLISH ...
Page 70: ...70 ENGLISH ...
Page 71: ...71 ENGLISH ...