27
2-4-4 Using “PPPoE” as broadband connection type
1.
If your ISP is providing you Internet access via PPPoE (Point-to-Point Protocol over
Ethernet), select “PPPoE”.
Item Name
Description
User Name
Input the user name assigned by your ISP here.
Password
Input the password assigned by your ISP here.
MAC Address
If your ISP only permits computers with certain MAC
addresses to access the Internet, input your computer’s MAC
address here. Press “Clone Mac address” to fill the MAC
address field with your computer’s MAC address
automatically.
DNS Address
Select “Use the following IP address” if your ISP requires that
you do so.
DNS Address 1
and 2
Enter the primary and secondary DNS addresses assigned by
your ISP here.
TTL
Enable the “TTL” function if your ISP requires you to do so.
Service Name
Give this Internet service a name (optional).
MTU
Input the MTU value of your network connection here. If you
do not know, use the default value.
Connection Type
Please specify a connection type here. There are 3 options:
1.
“Continuous” keeps the Internet connection alive all the
time.
