32
2-4-6 Using “L2TP” as broadband connection type
1.
Select “L2TP” if your ISP is providing you Internet access via L2TP (Layer-2
Tunneling Protocol).
2.
If your ISP is providing you dynamic IP addresses, select “Obtain an IP address
automatically”. If your ISP is providing you a static IP address, select “Use the
following IP address”.
Item Name
Description
Host Name
Input the host name of your computer here. This is optional
and only required if your ISP asks you to do so.
MAC Address
If your ISP only permits computers with certain MAC
addresses to access the Internet, input your computer’s MAC
address here. Press “Clone Mac address” to fill the MAC
address field with your computer’s MAC address
automatically.
IP Address
Input the IP address assigned by your ISP here.
Subnet Mask
Input the subnet mask assigned by your ISP here.
Default Gateway
Input the default gateway assigned by your ISP here. Some
ISPs may call this “Default Route”.
DNS Address
Select “Use the following IP address” if your ISP requires that
you do so.
DNS Address 1
and 2
Enter the primary and secondary DNS addresses assigned by
your ISP here.
Enable Dual-WAN Check the “Enable Dual-WAN Access” box if your ISP requires
