3
1.
Minimum Requirements
The following devices are required to configure
the ADSL2+ Router:
A PC with an Ethernet Adapter and a Web-Browser (Internet Explorer 4.0 or higher)
ADSL Line
RJ-45 Ethernet cable and RJ-11 Phone Line
2.
Product Package
This package contains the following components:
One ADSL2/2+ Router (Annex A or B)
12V Power Adapter
RJ-45 Ethernet Cable
RJ-11 Telephone Line
Quick Installation Guide
CD-ROM (Includes Setup Wizard, Manual and Multi-Languages Quick Installation Guide)
Splitter
Rear Panel
1)
Antenna
3 dBi Fixed antenna
2)
Reset
The Reset button can be used to restore to factory defaults.
If problems persisted or you forgot your router’s password, press the reset button for 10
seconds with power on. The router will reset to the factory default settings. (
Warning
: all your
current settings will be lost and replaced by the factory default settings)
3)
WPS
Press the WPS button 5 seconds to activate the wireless protection.
4)
Power Jack
Please plug-in the supplied power adapter to the ADSL Router’s power jack. The power adapter is
12V.
