4
4
Trouble-shooting
If you experience any problems with the adapter, first
make sure the appropriate driver is loaded, the proper
cable is connected to the adapter port and the hub
complies with the adapter specification, such as
10Mbps 10BaseT or 100Mbps 100BaseTX, then check
the LED.
The adapter provides two LEDs to indicate network
status.
n
Link/Activity
A green LED indicates if the 10/100Mbps UTP has
been LINK OK or not. When the light is OFF, it
indicates that the UTP port has not been connected or
link not ready. When the light is ON, it indicates that
the UTP port LINK OK. The LED will lit when there
are packets transmitted/received.
n
10/100Mbps
A yellow LED indicates that the adapter is working
under 10Mbps or 100Mbps environment. When the
light is OFF, it indicates that the line speed is 10Mbps.
When the light is ON, it indicates that the line speed is
100Mbps.
5
Summary of Contents for EN-9120
Page 9: ......
