4
Trouble-shooting
If you experience any problems with the adapter, first
make sure the appropriate driver is loaded, the proper
cable is connected to the adapter port and the hub
complies with the adapter specification, such as
10Mbps 10BaseT or 100Mbps 100BaseTX, then check
the LED.
The adapter provides one LEDs to indicate network
status.
Lnk/Act
A green LED indicates if the NIC has been LINK ok or
not. When the light is OFF, it indicates that the UTP
port has not been connected or LINK not ok. When the
light is ON, it indicates that the UTP port LINK ok.
When the light is BLINKING, it indicates that there is
traffic flow on the network which the adapter is
connected to.
6
