English Version
.
1. Introduction
Thank you for purchasing our Gigabit Ethernet Adapter. This
guide is to provide the installation and usage of this adapter for
network installers and users. The Gigabit network adapter
complies to 32-bit and supports Half/Full- duplex feature which
can double network speed.
This adapter supports 1000Mbps (Gigabit), 100Mbps and 10Mbps
network speed, 1000BaseT operates on all four pairs of category
5 UTP cable, 100BaseTX operates on two pairs of category 5
UTP cable and 10BaseT operates on Category 3, 4 or 5 UTP
cable.
With the Auto-Negotiation technology, network speed is auto
detected. When you connect the adapter to Gigabit Switch or
another Gigabit NIC, the speed will be doubled to 2000Mbps
(1000Mbps Transmit and 1000Mbps Receive). If you connect
the adapter to 100BaseTX hub, the network speed is 100Mbps.
Similarly, if the hub is a switching hub which supports full duplex
function, then the speed will be doubled to 200Mbps.
This adapter supplies many drivers including Microsoft Windows
98, 98SE, Me, NT, 2000, XP, Netware Server 4.x/5.x/6.x, Netware
ODI for DOS, Linux, Unix and MAC OSX 10.2.x/10.3... Whatever
your requirements are ease of installation, superior performance
or responsive support backed up by unlimited technical support,
this adapter is the superior choice.
2. Features
y
Supports 32-bit, 66/33MHz PCI Bus Master Version 2.2/2.1.
y
Comply with the IEEE 802.3, 802.3u, 802.3ab and 802.3x.
y
Supports IEEE 802.3x Full-Duplex flow control.
y
Supports IEEE 802.1Q VLAN tagging.
y
Supports Wake On LAN power management function.
y
Supports Jumbo Frame.
y
Plug and Play installation, auto-setup IRQ and I/O address.
y
Auto-Negotiation, full/half- duplex.
