4
2. Please insert the installation CD into your CDROM drive. The Autorun
setup programs should run under Windows 2000/XP/Server 2003/Vista,
or you can click on the “Browse CD” to find other OS drivers in the CD.
3. Connect the Ethernet adapter’s USB end to a free USB port of your
computer. Then a pop-up message will appear in the notification area
indicating the installation is complete.
* Actual strings depend on your operation system. These screen shots are
from Windows Vista and might vary slightly for each operation system.
Now the installation is complete. You can connect the adapter to a network
device by an Ethernet cable:
1. Connect an Ethernet cable to the Ethernet port on the adapter.
2. Connect the other end of the Ethernet cable to your network hub, switch or
router.
The Link LED should light up green to indicate a proper physical connection
between the adapter and the network. If the Link LED doesn’t light up, please
verify the cable connections between all the network devices.