background image

 

35

 

 

8. Troubleshooting 

 

This chapter provides solutions to problems usually encountered during the installation and operation 

of the adapter. 

 

1.  What is the IEEE 802.11g standard? 

802.11g is the new IEEE standard for high-speed wireless LAN communications that provides for 

up to 54 Mbps data rate in the 2.4 GHz band. 802.11g is quickly becoming the next mainstream 

wireless LAN technology for the home, office and public networks.   

802.11g defines the use of the same OFDM modulation technique specified in IEEE 802.11a for 

the 5 GHz frequency band and applies it in the same 2.4 GHz frequency band as IEEE 802.11b. 

The 802.11g standard requires backward compatibility with 802.11b. 

 

The standard specifically calls for:   

A.  A new physical layer for the 802.11 Medium Access Control (MAC) in the 2.4 GHz frequency 

band, known as the extended rate PHY (ERP). The ERP adds OFDM as a mandatory new 

coding scheme for 6, 12 and 24 Mbps (mandatory speeds), and 18, 36, 48 and 54 Mbps 

(optional speeds). The ERP includes the modulation schemes found in 802.11b including 

CCK for 11 and 5.5 Mbps and Barker code modulation for 2 and 1 Mbps. 

B.  A protection mechanism called RTS/CTS that governs how 802.11g devices and 802.11b 

devices interoperate. 

 

2.  What is the IEEE 802.11b standard

 

The IEEE 802.11b Wireless LAN standard subcommittee, which formulates the standard for the 

industry. The objective is to enable wireless LAN hardware from different manufactures to 

communicate. 

 

3.  What does IEEE 802.11 feature support

 

The product supports the following IEEE 802.11 functions: 

z

 

CSMA/CA plus Acknowledge Protocol 

z

 

Multi-Channel Roaming 

z

 

Automatic Rate Selection 

z

 

RTS/CTS Feature 

z

 

Fragmentation 

z

 

Power Management 

 

4. What 

is 

Ad-hoc

 

An Ad-hoc integrated wireless LAN is a group of computers, each has a Wireless LAN adapter, 

Connected as an independent wireless LAN. Ad hoc wireless LAN is applicable at a 

departmental scale for a branch or SOHO operation. 

 

5.  What is Infrastructure

 

An integrated wireless and wireless and wired LAN is called an Infrastructure configuration. 

Infrastructure is applicable to enterprise scale for wireless access to central database, or 

Summary of Contents for EW-7316Ug










































Reviews: