*How to use the Wi-Fi Detector:
1.
Slide the power switch to the “ON” position, and a welcome
screen will greet the user.
2.
After the welcome screen is displayed the Wi-Fi detector will
automatically enter scanning mode to detect Wi-Fi signals.
In scanning mode the LCM will display the total number of
both non-encrypted and encrypted Wi-Fi signals detected.
3.
Once scanning mode is complete, the detector will enter its
standard display mode.
The detector automatically sorts the signals by the following
criteria: Non-encryp
ted AP’s according to signal strength
followed by encrypted AP’s according to signal strength.
