9
Parameter Description
Mode
Station
– Set the USB adapter a wireless client.
Access Point
– Turns the USB adapter to function as a wireless
AP.
Network Adapter
Display the product information of the USB Adapter.
Available Network
Display all the SSID and Signal Strength of wireless stations
nearby. To re-survey the available wireless devices please click
“Refresh”.
There are two ways to automatically make the connection
between the USB Adapter and the wireless station on the list.
1. Double-click the wireless station on the list directly.
2. Select the station you intend to connect and then click
“Connect this site“.
Current Network Information
Display the information about the wireless network this adapter is
connecting to. The information includes Channel, Type, SSID, TX
Rate and Encrypt settings. Note: Please refer to Section 3.2 for
the description of each item.
More Setting
For setting more functions including disable/enable WEP and
Power Saving Mode, etc. Please refer to Section 3.2, 3.3 and 3.4.
Link Status
Display the status of the wireless connection.
