background image

 

 

R&TTE Compliance Statement 

 

This equipment complies with all the requirements of DIRECTIVE 1999/5/CE 
OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on 
radio equipment and telecommunication terminal Equipment and the mutual 
recognition of their conformity (R&TTE) 
The R&TTE Directive repeals and replaces in the directive 98/13/EEC 
(Telecommunications Terminal Equipment and Satellite Earth Station 
Equipment) As of April 8, 2000. 
 

Safety 

 

This equipment is designed with the utmost care for the safety of those who 
install and use it. However, special attention must be paid to the dangers of 
electric shock and static electricity when working with electrical equipment. All 
guidelines of this and of the computer manufacture must therefore be allowed 
at all times to ensure the safe use of the equipment. 
 

EU Countries Intended for Use  

 

The ETSI version of this device is intended for home and office use in Austria, 
Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, 
Luxembourg, the Netherlands, Portugal, Spain, Sweden, and the United 
Kingdom. 
The ETSI version of this device is also authorized for use in EFTA member 
states: Iceland, Liechtenstein, Norway, and Switzerland. 
 

EU Countries Not intended for use  

 

None. 
 

Summary of Contents for EW-7317UG























Reviews: