18
There are 4 types of technical information:
General: Displays basic information about this access point, such as SSID, MAC
Address, authentication / encryption type, channel etc.
WPS: If this access point supports WPS (Wi-Fi Protected Setup), related information will
be displayed here.
CCX: If this access point supports CCX (Cisco Compatible eXtension), related
information will be displayed here.
802.11n: If this access point complies with 802.11n draft, related information will be
displayed here.
And here are descriptions of every setup item in setup area:
Item Name
Description
Sorted by >>
You can decide how to sort all listed access point by „SSID‟,
„Channel‟, or „Signal‟ (signal strength).
Show dBm
Check this box to show the signal strength of access point,
instead of percentage.
Rescan
Click this button to rescan access points. You can click this
button for several times, if the access point you wish to use does
not show in the list.
Add to Profile
You can store a specific access point to profile, so you can link
to that access point directly next time, without inputting
authentication key again.
To add an access point to profile, you have to select an access
point from the list fi
rst, then click „Add to Profile‟ button. Detailed
instructions will be given below.
Connect
Connect to a selected access point. You have to select an
access point from the list first and
then click „Connect‟ to connect
to the selected access point.
