13
Private Network Name:
All HomePlug devices are shipped using a default
logical network (network name), which is normally “
HomePlug
”. If you wan to
set a privacy network, change the network name.
Use Default (Public Network):
The user can always reset to the HomePlug
network (Public) by entering “HomePlug” as the network name or by clicking on
the “
Use Default
(Public Network)”.
Set Local Device Only:
The
button
can be used to change the private network
name to all of the local devices. If a new network name is entered, all the
devices seen on the top panel of Main screen prior to this will be no longer
present in the new network. You have to set the new network name to all local
devices.
Set All Devices:
The button is used to set the new network name (network
password) to all HomePlug devices whose password has been entered for the
same logical network. A dialog window will appear to report the success of this
operation. For devices whose password is not entered, this operation will fail
and will report a failure message.
