FEATURES & TECHNICAL SPECIFICATIONS
Hardware
Standards
Effect Data Rate
1 x Power jack
1 x Power socket
1 x 10/100Mbps Ethernet LAN port
1 x Group/Reset button
LED indicators: power, Ethernet, powerline
IEEE 1901
IEEE 802.3
IEEE 802.3u
HomePlug AC compliant
TCP: Up to 95 Mbps effective throughput
UDP: Up to 95 Mbps effective throughput
Frequency Band
Modulation Schemes
Operating Range
2-28MHz (with Mask)
OFDM symbol modulation on line
synchronization 1024/256/64/16/8-QAM,
QPSK, BPSK, ROBO modulation
Up to 300 meters
QoS
Nodes
IGMP
4 levels priority based contention access,
and multi segment bursting
8 levels VLAN priority field, TOS field
QoS Classification by destination MAC
address and IP port
Up to 15 slaves with 1 master, 16 total
devices
Max 8 bridged devices per station
Support for IPv4/IGMPv1,v2,v3 snooping
Support for IPv6 and MLDv1, v2 snooping
Max 16 source addresses and group
members
IC / Memory
Security
Temperature & Humidity
1540
1MB Flash
8MB SDRAM
128-bit AES link encryption with key
management
0-45 degrees Celsius
10-90% (non-condensing)
Power Outlet
Dimensions & Weight
Power Consumption
Line Voltage: 100 to 240VAC
Noise Filter Insertion Loss: Up to 35dB at
1MHz – 40MHz
102 x 64 x 43mm
184g
4W
Power Source
Certification
100-240V AC, 50-60Hz
CE, FCC, LVD
www.edimax.com
500Mbps Nano PowerLine AdapterKit
with Integrated Power Socket
HP-5102ACK
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates, and coverage will vary depending on network
conditions and environmental factors. Product specifications and design are subject to change without notice.
NETWORK SETUP DIAGRAM
•
Plug a HP-5102AC into a power outlet and connect it to a broadband
router.
•
Plug another HP-5102AC to a power outlet and connect it to a
computer's Ethernet port to establish a powerline connection.
