- 31 -
Use Client
If the authentication type you use is ‘PEAP’ or ‘TTLS’, you can use the certificate
stored on your computer. If the authentication type you use is ‘TLS/Smart Card’,
this box is always checked.
More..
After you clicked this button, you’ll be prompted to select a certificate on your
computer.
Allow
This box is always checked and can not be modified.
unauthenticated
provision mode
Use protected
If the authentication type you use is ‘EAP-FAST’ you can use protected
authentication
authentication credential by check this box.
credential
Remove
Remove the credential you imported previously.
Import
Import the authentication credential file (PAC or al file format), you’ll be prompted to
select a credential file from your computer.
Protocol
You can select the protocol of tunneled authentication here. This pulldown menu is
only available when authentication type you use is ‘PEAP’ or ‘TTLS’. When you use
‘EAP-FAST’ as authentication type, the protocol setting is always ‘Generic Token
Card’ and can not be changed.
Identity
Please input the identity of tunneled authentication here.
(of tunneled
authentication)
Password
Please input the password of tunneled authentication here.
(of tunneled
authentication)
Password Mode
Please select the password mode of ‘EAP-FAST’ authentication mode.
This setting is hidden when the authentication type is not ‘EAP-FAST’.
After you finish all settings, click ‘OK’ to save settings and exit.
www.4GSource.net
