background image

Owner’s Manual

 

Thank you for purchasing the Edirol VMC-1 Video Optimizer/Media 
Converter.

Designed to deliver video and audio of a quality that rivals professional 
equipment, the VMC-1 provides a rich array of image-correction 
functionality and the capability to convert between analog and DV. It also 
provides four knobs that let you quickly and easily make adjustments to the 
image. Analog video such as VHS and eight-millimeter can be cleaned up 
and saved to DVD-R or other media. You can also use the VMC-1 to export 
analog video to a notebook computer that has only a DV connector.

 

Before using this unit, carefully read the sections entitled: “USING THE 
UNIT SAFELY” and “IMPORTANT NOTES” (p. 2–3, p. 4). These sections 
provide important information concerning the proper operation of the 
unit. Additionally, in order to feel assured that you have gained a good 
grasp of every feature provided by your new unit, Owner’s manual 
should be read in its entirety. The manual should be saved and kept on 
hand as a convenient reference.

Copyright © 2004 ROLAND CORPORATION

All rights reserved. No part of this publication may be reproduced in 
any form without the written permission of ROLAND CORPORATION.

VMC-1(A5)_e.book 1 ページ 2005年11月14日 月曜日 午後2時51分

Summary of Contents for VMC-1









































Reviews: