8
2.3 Keypad
SELECT
• In
Ω
Ω
position you can switch between Resistance measurement, Diode
test and Continuity check.
• In A
A,, m
mA
A,,
µµ
A
A position you can switch between DC and AC current.
• Power-up option disables automatic power-off feature.
HOLD/LIGHT
• Press this key to enter and exit the data hold mode.
• Press and hold key for 2 seconds (a beep will sound) and the backlight will
turn ON. If you press again for 2 seconds (a beep will sound) the backlight will
turn OFF.
RANGE
In V
V~
~,, V
V ,,
Ω
Ω
,, A
A,, m
mA
A and
µµ
A
A:
1. Press 'RANGE' to change from Auto (default) to manual mode.
2. Press 'RANGE' to step through the ranges available for the selected function.
3. Press and hold 'RANGE' for 2 seconds (
2 beeps will sound)
to return to auto ranging.
REL
Press R
RE
EL
L to enter and exit the Relative measurement mode. (This is available in
all ranges except Hz/DUTY).
MAX/MIN
This key is for measuring maximum and minimum value. (This is available in all
ranges except Hz/DUTY).
1. Press it to enter MAX/MIN mode (a beep will sound).
2. Press it again - The LCD will display the maximum value.
3. Press it again - The LCD will display the minimum value.
4. Press and hold it for 2 seconds (2 beeps will sound) and the meter will return
to normal measurement state.
5163440K_Instructions.qxd 18/09/2009 10:31 Page 8
