3 in1 Back Pack Pole Trimmer and Brush Cutter
11
Quick Start Guide
NOTE
: When starting engine for the first time, please refer to the full manual for further details if the steps below
does not work. Always use 25:1 petrol / (2-stroke) oil mix.
Ensure that enough petrol /
(2-stroke) oil mixture is in the
tank.
Press the primer bulb 2 – 3
times (fuel should flow
through the clear tube).
Press the ON/OFF switch
to ‘ON’.
Turn the choke to “COLD”.
Pull the starter cord 3 – 4
times (engine should start).
Turn the choke to “RUN”.
If the engine stalls, pull the
starter cord again until engine
starts.
Lift throttle up to turn
blades/drill.