Mode Setting:
There is a switch on the back of the Motion sensor.
You can slide it to left or right for different settings to control:
-
Interval: you can set the interval time between each motion
detection as 5 seconds of 5 minutes apart.
-
LED: you can select the LED indication on the motion sensor
to be OFF or ON.
Below example means interval of 5S and LED OFF.
1
Interval 5
Min 5S
2
LED
Off On
Installation:
Installation location should avoid too close to window, air conditioner,
fluorescent lights, heater, refrigerator, stove, sunlight and other places
where temperature would change rapidly and air flow speed is high. If
there are two detectors in the same detecting range, please adjust the
position to avoid the interfering resulting in false alarms.
