background image

 

Safety Precautions 

 

 

 Only use the ednet smart home devices within the specified 

temperature range for: 
Sensors & Actors: 0 ~ 40°C 

 

 When not in use, store the product in a clean and dry place in 

temperatures between 0°C and 40°C 

 

  Do not cover ednet.smart home products 

 

  Do not let the indoor devices including camera and sensors come into 

contact with liquids (except outdoor cameras with IP66 protective 
cover) 

 

  ednet Smart Home does not replace adult supervision. Safeguard 

the health of your children, family members or pets by regularly 
looking after them 

 

 Ensure that the indoor devices are only used inside. These 

devices are not intended for outdoor use and can be damaged. In 
this case use the specified outdoor models. 

 

  Protect the sensors and actors from electrical and other HF devices 

generating interferences (microwaves, mobile phones, etc.) 

 

  Keep camera, network cable and power cord outside the reach of 

children, since these components can be dangerous 

 

  Only use the supplied power adapter. 

 

 Never try to repair ednet smart home system by yourself. Repair 

and maintenance work must be carried out by specialists. 

 

  In case of problems contact our customer service. 

 

EN 

Summary of Contents for 84295














Reviews: