26
FASTBACK 9 USER’S MANUAL, 203860 Rev . A
TROUBLESHOOTING - ERROR MESSAGES
XIII
Possible Cause
Solution
The operator pressed the Bind button without inserting a
book into the binding recess .
Place a book into the machine and then press the Bind
button .
The sheets are not fully justified against the right side of the
binding recess .
Tap the edges of the sheets until the book is flush against
the right side of the binding recess prior to pressing the
BIND button .
The book sensor is damaged
Contact Powis Customer Service for service .
Possible Cause
Solution
You are trying to bind too many sheets with the medium strip . Remove some sheets .
Possible Cause
Solution
You are trying to bind too many sheets with a narrow strip .
Remove some sheets or use a medium width strip .
There is no strip in the binding recess .
Insert a medium strip .
Possible Cause
Solution
You are trying to bind too few sheets with a medium strip .
Add some sheets or use a narrow width strip .
There is no strip in the binding recess .
Insert a narrow strip .
Possible Cause
Solution
The strip is inserted into the machine backwards .
Make sure the short end of the strip is vertical and the
long end of the strip is flat.
Possible Cause
Solution
Machine needs technical attention .
Turn the machine off and then back on . If the error still
appears contact Powis Technical Support .
•
Error Message: “INSERT BOOK”
Possible Cause
Solution
The strip is too wide for the amount of sheets placed in the
binding recess .
Add more sheets or use a narrower width strip .
The strip is not folded .
Make sure to fully fold the strip into a 90 degree angle .
The strip is not lined up properly .
Make sure the strip and the sheets are justified against
the back of the binding recess .
•
Error Message: “USE SMALLER SIZE”
•
Error Message: “BOOK TOO THICK”
•
Error Message: “USE MEDIUM SIZE”
•
Error Message: “USE NARROW SIZE”
•
Error Message: “REVERSE STRIP”
•
Error Message: “MACHINE ERROR XX”
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
