background image

WiDRIVE User’s Guide 

 

Support@edslab.com

66

ration, SSID, Time Zone, Torrent, UPnP portmap, Port 

status and connected PC/device, etc.

To change the time zone, click Change button, choose 

your local time zone and click Save. The current time of 

selected time zone will be shown in the Status window.

The Torrent Client status is ON when Torrent is up and 

running,  OFF  when  Torrent  is  not  running  in  the  AP 

mode and Need Install if Torrent software is missing.

WiDRIVE Connection Utility requires the UPnP discov-

ery protocol to discover WiDRIVE on the network.

Click on the ‘MAP’ button to map Incoming packet’s port 

number to the local computer with IP address.

On connected PC/device, make sure the device is con-

nected to your computer.

3.4.2 Login

The Login panel is where the administrator defines the 

Admin  and  Guest  accounts,  and  Dynamic  DNS  Ac-

cess.

Enter  the  new  admin’s  and  guest’s  passwords  in  the 

two fields and press the  Apply button. The password 

can be up to 12 characters. 

The Dynamic DNS Access option allows you to set the 

DNS server. You may sign up Dynamic DNS service at 

http://www.dyndns.org and there you can also register 

“domain names”. 

Enter one domain name you have registered.

Enter the username and password used for sign-up.

Set  the  port  number  of  external  port  from  1025  to 

65535.

Check the “Disabled” radio button to stop the Dynamic 

DNS service.

3.4.3 Base Network Setup

Click on the Basic Network panel on the Control Panel.  

Using this page you may configure the the IP address 

of the device as well as channel, and SSID.

Enter the IP address of the device and the subnet mask 

for the IP address.

The SSID is a unique named shared amongst all the 

points of the wireless network. It must be identical on 

all points of the wireless network and cannot exceed 32 

characters.

Select a channel from the drop-down list. The channels 

available are based on the country’s regulation. 

Select  Disable  radio  button  if  your  wireless  network 

does  not  use  any  type  of  encryption,  WEP  64,  WEP 

128, WPA, or WPA2 radio button if your wireless net-

work uses this encryption. 

Summary of Contents for WiDRIVE

























Reviews: