981C-230 instruction manual
THE NAMES LONER, SOLDAPULLT, SOLDAVAC, ATMOSCOPE
AUTO-VAC, IDLE-REST, PIXTER, FUMINATOR, OCTAVAC AND KLATCH
ARE REGISTERED TRADEMARKS OF EDSYN, INC.
MOST PRODUCTS ARE COVERED BY U.S. AND
FOREIGN PATENTS AND PENDING APPLICATIONS.
DESIGN, COLOR AND MATERIALS
SUBJECT TO CHANGE WITHOUT NOTICE.
TIP STYLE ON SOLDERING, DESOLDERING AND HOT AIR TOOLS MAY VARY.
PRINTED IN U.S.A.
ALL RIGHTS RESERVED.
NO PART OF THIS PUBLICATION INCLUDING THE INDIVIDUAL ICONS
MAY BE REPRODUCED OR UTILIZED IN ANY FORM OR BY ANY MEANS
WITHOUT THE PERMISSION OF EDSYN, INC.
981C-230i .pdf
Intellectual
Property
©Copyright EDSYN, Inc. 2002
CAUTION:
Over-filling can cause thermal shock
to the tip or heating element during
tip cleaning.
• Replace RS199 Cleaning Sponge
1.
Fill water only up to the top of the
RS243
Leveling Pad.
2.
Depress
RS199
to moisten it completely.
• Replace SC581 Solder Collector
1.
Hold the Housing firm and turn Cap
counter-clockwise and pull it away from the
Housing.
2.
Remove used
SC581
and replace with
a new one.
3.
Reassemble Pod with TOP of the Cap in
proper position.
MAINTENANCE
LN230
SH230-1
RS243
RS199
SC581
Solder Col-
lector
SR043
Front Hous-
ing
SR042
Thermal
Housing
