REPLACING TIPS
LN230
SH230-1
CAUTION:
Over-filling can cause thermal shock to the tip
or heating element during tip cleaning.
RS243
RS199
Replace RS199 Cleaning Sponge
1. Fill water only up to the top of the
RS243
Leveling Pad.
2. Depress
RS199
to moisten it completely.
Replace SC581 Solder Collector
1. Hold the Housing firm and turn Cap counter-clockwise
and pull it away from the Housing.
2. Remove used
SC581
and replace with a new one.
3. Reassemble Pod with TOP of the Cap in proper position.
MAINTENANCE
To replace Pod, press Release Tab
and slide out Pod.
pull
PD528
SC581
SR043
Front Housing
SR042
Thermal Housing
press
Part No. & Description
a
b
LT374
Standard Probe
.03 (0.8 mm)
.48 (12.2 mm)
LT375
Standard Spade
.06 (1.5 mm)
.48 (12.2 mm)
LT376-7
SMD Channel
.12 (3.0 mm)
.48 (12.2 mn)
LT392
Extra-Long Needle
.02 (0.5 mm)
1.13 (28.8 mm)
LT394
Extra-Long Spade
.07 (2.0 mm)
.93 (23.6 mm)
LT399
Large Face
.17 (4.3 mm)
.49 (12.4 mm)
LT444
SMD Mid-Length Fine Spade
.04 (1.0 mm)
.78 (19.8 mm)
LT446
SMD Probe
.03 (0.8 mm)
.48 (12.2 mm)
LT382
Long Cone
.02 (0.5 mm)
.62 (15.6 mm)
LT395
Mid-Length Stubby Spade
.09 (2.3 mm)
.74 (18.8 mm)
LT431
Mid-Length Spade
.07 (1.8 mm)
.74 (18.8 mm)
LT439
SMD Thin Probe
.03 (0.8 mm)
.50 (12.7 mm)
LT439-1
Same as LT439, Angled
LT445
SMD Angle Face
.03 (0.8 mm)
.48 (12.2 mm)
General Purpose Soldering Tips
Iron Plated for long lifeNickel and Chrome Plated for optimum heat transfer.
EDSYN has over a 100 varieties of standard and custom-made Tips. CONTACT EDSYN FOR MORE SELECTIONS.
LTC71
b
a
RCS71
CAUTION
1. Tool must be cool when
changing tips.
2. Do not twist or wiggle
the tip.
Loosen RCS71 Collar by
turning counter-clockwise
and pull the Tip straight out.
AFTER TIP IS INSTALLED, TIGHTEN
COLLAR PROPERLY.
