Installing the base using ISOFIX
Press the stand release button and extend
the stand feet to
lightly touch
the floor of
your vehicle.
WARNING
- always check that the base sits level or slightly sloped
towards the bottom of your vehicle’s passenger seat. You can use
the level indicator found on the car seat capsule for guidance (see the
instructions provided for your capsule).
An incorrectly installed car seat may cause death or injury. If you
are unsure, please contact us or talk to your local Child Restraint
Technician, found via the New Zealand Transport Agency website -
www.nzta.govt.nz
9
Removing the base using ISOFIX
Remove the ISOFIX fixing lock by pressing the release button as
shown in Figure (1).
Retract the stand by pressing the stand release button and pushing
it back into its housing as shown in Figure (2).
Retract the ISOFIX fixing lock into its housing as shown in Figure
(3).
Retract the stand into its housing as shown in Figure (4).
1 2
1
2
3
4
designed in NZ
Summary of Contents for PA0100
Page 14: ...edwardsandcobaby com ...
