© Edwards Limited 2014. All rights reserved.
Page 3
Edwards and the Edwards logo are trademarks of Edwards Limited.
Installation
NRD317880 Issue A
3
Installation
3.1
Safety
A suitably trained and supervised technician must install the Acoustic Enclosure.
Ensure that all equipment is safe and in a suitable condition to be installed in the enclosure.
For safety issues, refer to Edwards Vacuum Pump and Vacuum System Safety Publication P400-40-100 or
contact Edwards if in doubt.
Casters should be locked when the pump is in operation.
Route all electrical cables in a safe manner.
WARNING
Obey the safety instructions given below and take note of appropriate precautions. Failure to do
so can cause injury to people and damage to equipment.
WARNING
Care should be taken when removing the enclosure from the packaging and also when removing
the enclosure side panels.
WARNING
Use suitable lifting equipment or at least two people to lift the empty Acoustic Enclosure.
WARNING
Do not lift the Acoustic Enclosure with a pump installed.
WARNING
Be careful not to drop any of the enclosure panels during assembly/disassembly as this may either
damage the panel or cause injury.
WARNING
Do not install the enclosure on a slope. When the casters are unlocked the enclosure could move
and cause injury.
